VI-200 and VI-J00 Series

Military COTS Version Available »

Quick Links

VI-200 / VE-200 Family Data Sheet »

VI-J00 / VE-J00 Family Data Sheet »

VI-200 / VI-J00 Design Guide and Application Manual »

PowerBench™ – VI-200 / VI-J00 Product Configurator »

Related Products

Maxi, Mini & Micro DC-DC Converters »

VI-200 / VI-J00 DC-DC Converters »

MegaMod Chassis-Mount DC-DC Converters »

Custom Turnkey Solutions

Can’t find a match for your specs? We can design and manufacture turnkey custom power systems that meet your specific needs!

USA:

Vicor Custom Power »

Input Voltages:

10 – 400 Vdc

Output Voltages:

1 – 95 Vdc

Output Power:

(per module)

VI-200: 50 – 200 W
VI-J00: 25 – 100 W

Dimensions:

VI-200 (full brick): 4.6" x 2.4" x 0.5"
(116,9 x 61,0 x 12,7 mm)
VI-J00 (half brick): 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7 mm)

Up to 50 W/In³
Remote sense and current limit
Overvoltage protection, thermal shutdown (VI-200 / VE-200)
Logic disable
Wide range output adjust
Compatible power booster modules (VI-200 / VE-200)
ZCS power architecture
Low noise FM control

The VI-200 and VI-J00 series of DC-DC converters have set the standard for high power, low noise, reliability and ease of use in the component power industry. Thousands of combinations of input voltage, output voltage and power level means not having to compromise when selecting modules for your power system. These power modules are field proven with an installed base of over 10 million units.

Compact and efficient, VI-200 and VI-J00 converters feature wide input voltage ranges, remote sense, enhanced output programmability, and low standby dissipation. Power boosters provide a simple, cost effective solution for higher power requirements; up to kilowatts. VI-200 products also offer output overvoltage protection and thermal shutdown. VI-J00 units can operate to 100°C baseplate temperatures.

These units are available in several different temperature grades (down to -55°C operation and -65°C storage) and with different baseplate styles. The electronic circuitry is fully encapsulated for protection in harsh environments and models are available with integral heat sinks. Call factory for special requirements.

Vicor's experienced Application Engineers are here to help.

Contact Customer Service:

For help with product selection and availability, placing an order and order status:

800-735-6200

Email: custserv@vicorpower.com

International Sales & Service »

Ask about our Express Order Program - Great for Prototype Samples!

Helps you optimize your design and accelerate the prototyping process

Contact Customer Service:

International Support Contacts

Email: custserv@vicorpower.com

Contact Sales / Customer Service »

Applications Engineering Support »

Soldering Methods and Procedures for Vicor Power Modules »
Powering Dynamic Loads »
Meeting Conducted Noise Standards »
Designing a Power Supply with Multiple Input Options »
Creating High Voltage Outputs »
Using Modular DC-DC Converters to Meet European Standards for Railway Applications »
Current Share Board »
Constant Current Control for DC-DC Converters »
Undervoltage / Overvoltage Lockout »

All Application Notes »

VI-200 / VE-200 Family Data Sheet »
VI-J00 / VE-J00 Family Data Sheet »

Download Entire Manual

VI-200, VI-J00 Design Guide and Applications Manual »

Download Individual Chapters

Zero-Current Switching »
DC-DC Converter Pinouts »
Module Dos and Donts »
Overcurrent Protection »
Output Voltage Trimming »
Multiple Gate In Connections »
Applications Circuits / Converter Array Design Considerations »
Using Boosters and Parallel Arrays »
EMC Considerations »
Optional Output Filters »
Battery Charger (BatMod) »

Filter and Front-End Module Chapters

Power System Chapters

General Chapters

These calculator programs allow users to determine values that help with accessory
component selection for power system design.

Trim Resistor Calculators
Trim resistors for fixed output voltage trimming »
Trim resistors for variable output voltage trimming »

Thermal Calculators
Thermal impedance calculator »

Thermal data and heat sink selection tool »
This is a downloadable Excel file.

Drawing Number	Description	RoHS	Technical Drawing
03550	Outline Drawing for VI-J00 / VE-J00		PDF \| DXF
05429	Outline Drawing for VI-200 / VE-200		PDF \| DXF

PowerBench™ – VI-200 / VI-J00 Product Configurator »
The VI-200 / VI-J00 configurator allows you to select from the largest offering of DC-DC converter products in the industry. By selecting input voltage, output voltage, power level, and grade you will receive a part number, price, and delivery date.

VI-200 / VE-200 Family DC-DC Converters	cURus – UL 60950-1, CSA 60950-1 cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1 CE Marked – Low Voltage Directive (2006/95/EC) CB Certificate – IEC 60950-1:2001

VI-J00 / VE-J00 Family DC-DC Converters	cURus – UL 60950-1, CSA 60950-1 cTÜVus – EN 60950-1, UL 60950-1, CSA 60950-1 CE Marked – Low Voltage Directive (2006/95/EC) CB Certificate – IEC 60950-1:2001

IAM - Input Attenuator Module - DC input, front-end module providing transient protection, inrush current limiting and EMI filtering for VI-200 and VI-J00 DC-DC converters.

QPI Family Input Filters - QPIs provide common-mode and differential-mode attenuation from 150 kHz to 30 MHz in a 1.0" x 1.0" (25 x 25 mm) surface mount package.

RAM - Ripple Attenuator Module - The RAM may be connected to VI-200 or VI-J00 converters with output voltages from 5 – 50 Volts, to limit total output noise to less than 3 mV peak-to-peak at loads up to 20 Amps.

MicroRAM - Output Ripple Attenuator Module - The MicroRAM combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from over a range of 3 – 30 Vdc.

QPO Family Output Filters - QPO filters use active filtering to reduce power supply ripple and noise in a 1.0" x 1.0"
(25 x 25 mm) surface mount package.

AIM - AC Input Front-end Module - The AIM is an AC front-end module which interfaces directly with worldwide AC mains to provide line rectification, EMI filtering, transient protection, and inrush limiting.

ARM - Autoranging Rectifier Module - The ARM is the front end of a switching power supply and uses a microprocessor to control strapping of the voltage doubler.

FARM - Filter / Autoranging Rectifier Module - The FARM is an AC front-end module which provides EMI filtering, autoranging line rectification and inrush current limiting.

ENMods - Modular AC Front-end System - The ENMods system combines EMI filtering with the FARM and MiniHAM modules creating an AC front end fully compliant with European norms for harmonic current limits, EMI and input transient immunity.

Off-line Front End - Vicors family of off-line front ends interface any 300 Vin DC-DC converters or configurable products, to 100, 115, 230 or 240 Vac single-phase and 208 Vac three-phase mains.

High-Boost HAM - AC Harmonic Attenuator Module - The HAM module is a full-wave rectifier with a high-frequency zero-current switching (ZCS) boost converter providing up to 675 Watts of power in a full-brick package.

Terminal block for VI-200 / VI-J00-size modules

Click img. to enlarge	Description	P/N	RoHS	Technical Drawing
	Rugged chassis-mount housing for VI-200 module * (add-B1 suffix to module number for preinstalled)	06322		PDF \| DXF
	Rugged chassis-mount housing for VI-J00 module (add-B1 suffix to module number for preinstalled)	18952		PDF \| DXF

	* Not for use with HAM module.

Click img. to enlarge	Description	P/N	Capacitance	Voltage Rating	RoHS	Technical Drawing
	SMT Polymer	23484-337	330 µF	6.3 V		PDF \| DXF
	SMT Polymer	23484-477	470 µF	6.3 V		PDF \| DXF
	SMT Polymer	23579-227	220 µF	10 V		PDF \| DXF

	Al-El (10 mm x 16 mm)	30468	270 µF	25 V		PDF \| DXF
	Al-El (16 mm x 15 mm)	33985	820 µF	25 V		PDF \| DXF
	Al-El (10 mm x 16 mm)	30788	68 µF	63 V		PDF \| DXF
	Al-El (10 mm x 16 mm)	30787	220 µF	63 V		PDF \| DXF
	Al-El (12 mm x 25 mm)	30799	10 µF	450 V		PDF \| DXF

	Tantalum	24252	270 µF	10 V		PDF \| DXF
	Tantalum	30506	120 µF	20 V		PDF \| DXF
	Tantalum	30507	68 µF	30 V		PDF \| DXF
	Tantalum	30259	27 µF	50 V		PDF \| DXF

	Y-Cap Surface Mount	30802	1,500 pF	250 V		PDF \| DXF
	Y-Cap Surface Mount	25283	4,700 pF	250 Vac		PDF \| DXF
	Y-Cap	00770	1,500 pF	250 Vac		PDF \| DXF
	Y-Cap	01000	4,700 pF	250 Vac		PDF \| DXF
	Y-Cap	01501	0.01 µF	250 V		PDF \| DXF
	Y-Cap	03093	0.022 µF	250 V		PDF \| DXF

	Multilayer Film Cap	34610	0.61 µF	250 V		PDF \| DXF

Click img. to enlarge	Description	P/N	Voltage Rating	Current Rating	RoHS	Technical Drawing
	ORing Diode, TO-220 Dual	02838	35 V	30 A		PDF \| DXF

	ORing Diode, D61-8	10122	15 V	80 A

Click img. to enlarge	Description	P/N	RoHS	Technical Drawing
	VI-200 Shield with Pem Nuts	30139		PDF \| DXF
	VI-J00 Shield without Pem Nuts	32184		PDF \| DXF
	VI-200 Shield without Pem Nuts	32175		PDF \| DXF

Click img. to enlarge	Description	P/N	Voltage Rating	Current Rating	RoHS	Technical Drawing
	PC Tron	30772	450 V	2.5 A		PDF \| DXF
	PC Tron	30243	250 V	3 A		PDF \| DXF
	PC Tron	30276	125 V	5 A		PDF \| DXF

Common Mode

Click img. to enlarge

Description

P/N

Inductance

Rated Current

DCR
(max)

RoHS

Technical Drawing

Common-mode input

31743

1,000 µH

12 A

6.5 mΩ

Sockets
Click img. to enlarge	Description	Pin Size	P/N	RoHS	Technical Drawing
	Electro-tin finish	0.040"	30074		PDF \| DXF
	Electro-tin finish	0.080"	30075		PDF \| DXF


Standoffs
Click img. to enlarge	Description		P/N	RoHS	Technical Drawing
	Six 0.25" x 0.525 Long Female, 0.25" Hex		32183-01		PDF \| DXF